Gear pump kcb 200 flow 200L/min; Head:0.33MPa; Inlet/Outlet:2″(DN50mm); Pump is made of cast iron or stainless steel (SS 304,SS 316,SS316L)
KCB 200 and KCB 135 are same gear pump. KCB 200 with 4KW-1440RPM, KCB 135 with 2.2KW-960RPM. So flow is different.
Suitable for conveying all kinds of oils, such as heavy oil, oil, lubricating oil, with copper gear can convey low liquid inside point, such as gas oil, diesel oil, so called gear pump, stainless steel gear pump can convey drinks and corrosive liquid.
Not suitable for hard particles or fibers, the applicable viscosity is 5×10-5 ~ 1.5×103m2/s.
If the temperature is not high, it is 80℃. If you need to transfer high-temperature liquid, please use a high temperature resistant oil pump, which can transfer liquid below 300℃.
1：Simple and compact structure, easy to use and maintain.
2：with good self-priming, so every time before the pump should not be filled with liquid.
3：lubrication is by the delivery of liquid and automatic, so there is no need to add lubrication in the daily work.
4：The use of elastic coupling to transfer power can compensate for the small deviation caused by installation.
In the oil pump work by the inevitable hydraulic impact, it can play a good buffering role.
This article is provided by gear pump manufacturer.
